Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Dryzone Drygrip Adhesive 600ml
Hover Over to Zoom In
Frequently bought together
Overview
- A salt and damp resistant adhesive
- Provides excellent bonding and high moisture resistance
- Forms a long-lasting bond
- Part of the Dryzone System
Technical specification
Size
600ml
Interior or Exterior Use
Interior
Coverage per Litre
1 - 2 Drygrip cartridges per sheet of standard plasterboard
Drying Time
30 minutes
Time to Full Cure
2 mm in depth per 24 hours
VOC Level
Minimal 0-0.29%
Colour
White
Type
Adhesive
Brand Name
Dryzone
Manufacturer Model No
DM-DRYGRIP ADHESIVE
Data sheets
Reviews
Be the first to review this product.
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Sika Grey Damp Proofing Slurry 25kg
Sika Damp-proofing Slurry is a ready to use (just add water), high quality, thin layer waterproof slurry coating, based on special cements and admixtures to provide a water and damp proof finish.
£59.11 each (Inc. VAT)
Safeguard Drybase TS-Plus Tanking Slurry 20kg
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
£30.73 each (Inc. VAT)
Safeguard Dryzone Anti-mould Paint Additive 100ml
Dryzone Anti-Mould Additive is a highly-effective biocidal additive liquid. It imparts paints, wallpaper pastes and tile grouts with mould-resistant properties. The special biocidal formula of the additive will resist the growth of mould in areas of persistent condensation for up to five years.
£9.08 each (Inc. VAT)