Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Dryzone Anti-mould Paint Additive 100ml
Hover Over to Zoom In
Frequently bought together
Overview
- Adds mould-resistance to paints, wallpaper pastes and tile grouts
- Compatible with all types of paint (emulsion, vinyl, silk or matte)
- Up to 5 years mould-resistance
- Does not affect paint washability
- 12 month shelf-life and easy storage
Technical specification
Size
100ml
Interior or Exterior Use
Interior
Coverage per Litre
Depends on paint selected
Drying Time
Depends on paint selected
Time to Full Cure
Depends on paint selected
VOC Level
Low 0.3-7.1%
Colour
Yellow
Type
Anti-Mould Additive
Manufacturer Model No
DM-DRYZONE AM ADDITIVE
Brand Name
Safeguard
Data sheets
Reviews
Be the first to review this product.
Safeguard Drybase Tanking Slurry Bba 25 Kg
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
£59.06 each (Inc. VAT)
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Dryzone Targeted Treatment Damp ProCourse Cream - Box 10
Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall.
£221.76 per box (Inc. VAT)
Safeguard Drybase Construction Joint Tape 180mm X 30m
Drybase Construction Joint Tape is a synthetic rubber strip, approximately 0.7 mm thick. It is covered on both sides with an alkaliresistant and flexible polyester fabric mat, which forms a web on the edges. The combined properties of the fabric mat and synthetic rubber ensure a strong bond with the concrete surface, maintaining excellent elasticity of the tape.
£103.38 each (Inc. VAT)