Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Visqueen Damp ProCourse 300mm x 20m
Hover Over to Zoom In
Frequently bought together
Overview
- Excellent performance under high compressive loads
- Contains no hazardous pitch or PVC plasticisers making it safe and clean to handle
- Low permeability to Radon and Carbon Dioxide gases
- Superior strength, tear resistance and flexibility
- Excellent mortar adhesion
- BBA Certificate No.94/3059
Technical specification
Brand Name
Visqueen
Length
20 m
Thickness
0.80 mm
Width
300 mm
Material
Copolymer Thermoplastic
Colour
Black
Coverage
6 m2
Type
Damp Proof Course
Reviews
Be the first to review this product.
Sovereign 30806103 Corner Strip 20M
Sovereign Corner Strip is a synthetic butyl/rubber based extruded strip sealant laminated with a PVC liner. It is primarily used for creating a seal over joints between SovDrain membranes, as part of the SovDrain waterproofing system.
£87.32 each (Inc. VAT)
IKO Hyload Original Damp Proof Course 150mm x 20m
IKO Hyload Original Damp-proof Course system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.Trusted for over 40 years, Hyload Original is the UKs leading High Performance DPC
£60.98 per roll (Inc. VAT)
Sovereign 30806088 CDM8 Membrane Roll 2M x 20M
Sovereign CDM8 membrane provides a robust drainage membrane suitable for above and below ground applications to walls and floors as part of the SovDrain waterproofing system. With a fast track application, the membrane protects new finishes from the effects of dampness and/or salt contamination in above ground situations, and prevents water ingress below ground in areas such as cellars, basements, vaults, and tunnels. This membrane has a relatively low stud profile (8mm), thus minimising wall and floor level changes. The CDM8 membrane is typically finished with either a pre-treated timber stud partition wall and plasterboard or independent stud metal frame system. The floors can be finished with a Sovereign SBR modified screed (minimum 65mm) or a floating floor.
£311.89 each (Inc. VAT)
Safeguard Dryrod Damp Proofing Rods Pack of 50
Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£106.87 per box (Inc. VAT)