Waterproof butyl 75mm overseal tape for sealing over membrane joints, butt joints and overlaps to provide additional protection. Drybase Overseal Tapes are utilised for sealing over joints between Drybase cavity drain membranes and other materials. They can also be applied for sealing around services and challenging details.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Sovereign Fleeced Overseal Tape is a synthetic butyl/rubber based preformed strip sealant laminated with a non woven polyester fleece. It's primarily used for creating a joint overseal where SovDrain Cavity Drain Membranes are used.
Size
2mm x 100mm x 10m
Length
10m
Thickness
2mm ± 0.2mm
Width
100mm
Material
Synthetic Butyl/Rubber Sealant Laminated with Non-woven Polyester Fleece
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications.
Waterproof butyl 75mm overseal tape for sealing over membrane joints, butt joints and overlaps to provide additional protection. Drybase Overseal Tapes are utilised for sealing over joints between Drybase cavity drain membranes and other materials. They can also be applied for sealing around services and challenging details.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Sovereign Fleeced Overseal Tape is a synthetic butyl/rubber based preformed strip sealant laminated with a non woven polyester fleece. It's primarily used for creating a joint overseal where SovDrain Cavity Drain Membranes are used.
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications.