Can help to achieve 0.18 U-value in 100mm cavities
Tongue and groove rebate minimises thermal bridging
Fire performance: Surface spread of flame: Class 1 (BS 476, Part 7), Euroclass F (BS EN 13501-1)
Easy and fast installation
BBA Certified (BBA certificate 02/3908), CE marked, ISO 9001 and ISO 14002
Alkali-resistant facing
The CCPI verification mark only applies to Eurowall+ PIR Insulation board ONLY and does not cover the whole system. Find out more about the CCPI - https://www.cpicode.org.uk/about/
Actis Hybris Panels are 1.2m in length, 114.5 cm in width, and have a thickness of 15.5cm, providing a total coverage area of 2.74m2.
Made of shaped polyethylene foam bonded to aluminium-coated films, their honeycomb structure with low-emissivity cavities provides high thermal efficiency. Heat capacity is 2300JK/kgK. Suitable for timber frames, masonry, pitched roofs, ceilings, and floors. Lightweight with tensile strength over 45kPa, tested to EN 1608 and EN 12310-1, durability maintained after ageing.
SuperFOIL SUPERIOR Foil Tape is a glass fibre reinforced tape, suitable for use with all non-breathable SuperFOIL products. It's superior adhesive makes easy work of sealing overlaps, joints and penetrations and is ideal for use in cold weather.
Acoustic Intumescent Sealant is a high specification, one part water based acrylic sealant. Acoustic Intumescent Sealant is designed for use in the installation of ROCKWOOL Ablative Coated Batt, sealing linear joints and some individual service penetrations passing through various substrates.
Range Description
FIREPRO
Brand Name
Rockwool
Manufacturer Model No
212902
Size
310 ml
Container Type
Cartridge
Certifications Met
CoCoP: 2531-CPR-CXO10266, ETA - 20/1129, ETA - 20/1130, UL-EU: 01203-CPR
Thermaclass Cavity Wall 21 is an easy to install, polyisocyanurate (PIR) insulation board for full fill cavity wall applications, with excellent thermal performance (0.021 W/m.K). Featuring a low emissivity foil facing, it can be installed with up to a 10mm residual cavity (to support ease of installation and accommodate mortar squeeze) or as a full fill solution with no residual cavity. Another significant benefit of Thermaclass Cavity Wall 21 is that it does not require board joints to be taped, saving both time and additional cost to the installer. The tongue and groove edge profile helps to keep the boards in line and acts as the barrier to water ingress by preventing water from tracking between the board joints.
Actis Hybris Panels are 1.2m in length, 114.5 cm in width, and have a thickness of 15.5cm, providing a total coverage area of 2.74m2.
Made of shaped polyethylene foam bonded to aluminium-coated films, their honeycomb structure with low-emissivity cavities provides high thermal efficiency. Heat capacity is 2300JK/kgK. Suitable for timber frames, masonry, pitched roofs, ceilings, and floors. Lightweight with tensile strength over 45kPa, tested to EN 1608 and EN 12310-1, durability maintained after ageing.
SuperFOIL SUPERIOR Foil Tape is a glass fibre reinforced tape, suitable for use with all non-breathable SuperFOIL products. It's superior adhesive makes easy work of sealing overlaps, joints and penetrations and is ideal for use in cold weather.
Acoustic Intumescent Sealant is a high specification, one part water based acrylic sealant. Acoustic Intumescent Sealant is designed for use in the installation of ROCKWOOL Ablative Coated Batt, sealing linear joints and some individual service penetrations passing through various substrates.
Thermaclass Cavity Wall 21 is an easy to install, polyisocyanurate (PIR) insulation board for full fill cavity wall applications, with excellent thermal performance (0.021 W/m.K). Featuring a low emissivity foil facing, it can be installed with up to a 10mm residual cavity (to support ease of installation and accommodate mortar squeeze) or as a full fill solution with no residual cavity. Another significant benefit of Thermaclass Cavity Wall 21 is that it does not require board joints to be taped, saving both time and additional cost to the installer. The tongue and groove edge profile helps to keep the boards in line and acts as the barrier to water ingress by preventing water from tracking between the board joints.