Compact and well balanced planer with a 2mm depth of cut and a 9mm rebate capacity. 0.1mm indexed fine adjustment for accurate planing. Brushless motor for excellent efficiency and long tool life. XR switch and module protect the motor from overload and battery from deep discharge. AirLock port compatibility with dust bag or extraction. Traditional blade change with hex wrench or torx key. Includes on-board blade storage for 2 x 82mm blades and Torx key storage to minimise down time. Supplied with 82mm reversible TCT blades, guide fence and alignment guide. Compatible with DeWalt XR Li-ion slide pack batteries. (Please note battery is not included).
The Milwaukee M18 FUEL 18V Generation 4 system is equipped with two 5.0Ah LI-ION Redlithium batteries. The model M18FPD3 demonstrates superior power efficiency under load, providing a torque output of 158 Nm while maintaining a compact length of 175 mm, facilitating access to confined spaces. The 13 mm metal chuck enables rapid bit changes and enhances bit retention, while the AUTOSTOPâ„¢ control mode improves operator safety by preventing excessive rotation during a bind-up scenario.
The Milwaukee M18 Brushless Cordless Percussion Drill is the ultimate jobsite workhorse, delivering an ideal combination of raw power, extended runtime, and compact ergonomics. Specifically engineered for trade professionals, this heavy-duty combi drill offers excellent balance and control, making it highly maneuverable when working in tight, awkward spaces or during prolonged overhead drilling.
At the core of this tool is a highly efficient Milwaukee brushless motor, optimized to extract maximum performance from the included two 5.0Ah REDLITHIUM battery packs. To ensure your investment survives the harshest jobsite conditions, the drill features advanced REDLINKâ„¢ overload protection technology, an intelligent electronic system that constantly monitors and defends both the tool and battery against stressful overloading and overheating.
Blows per Minute
0-28800
Maximum Torque
82
Maximum Diameter (Masonry)
16 mm
Maximum Diameter (Wood)
76 mm
Maximum Diameter (Steel)
13 mm
Number of Torque Settings
2
Brushless
Yes
No Load Speed
0-1800
Weight
2.10 kg
Chuck Capacity
13 mm
Chuck Type
Black Oxide
Power Type
Cordless
Battery Type
Lithium-ion
Battery Storage Capacity
5.0 Ah
Number of Batteries
2
Charge Time
59 MINS
Voltage
18 V
Case
Yes
Includes
1 x M18BLPD2 / 2 X M18B5 / 1 X M12-M18FC / 1 X DYNACASE
The DeWalt 600W Biscuit Joiner has been constructed with a powerful motor of up to 10000 rpm, making it ideal for working with hardwoods. The dual rack and pinion fence ensuring blade and fence parallelism for accurate joints every time. The joiner has pre-set cutting depths for 0,10 and 20 biscuit sizes with additional adjustments for finer accuracy.
Compact and well balanced planer with a 2mm depth of cut and a 9mm rebate capacity. 0.1mm indexed fine adjustment for accurate planing. Brushless motor for excellent efficiency and long tool life. XR switch and module protect the motor from overload and battery from deep discharge. AirLock port compatibility with dust bag or extraction. Traditional blade change with hex wrench or torx key. Includes on-board blade storage for 2 x 82mm blades and Torx key storage to minimise down time. Supplied with 82mm reversible TCT blades, guide fence and alignment guide. Compatible with DeWalt XR Li-ion slide pack batteries. (Please note battery is not included).
The Milwaukee M18 FUEL 18V Generation 4 system is equipped with two 5.0Ah LI-ION Redlithium batteries. The model M18FPD3 demonstrates superior power efficiency under load, providing a torque output of 158 Nm while maintaining a compact length of 175 mm, facilitating access to confined spaces. The 13 mm metal chuck enables rapid bit changes and enhances bit retention, while the AUTOSTOPâ„¢ control mode improves operator safety by preventing excessive rotation during a bind-up scenario.
The Milwaukee M18 Brushless Cordless Percussion Drill is the ultimate jobsite workhorse, delivering an ideal combination of raw power, extended runtime, and compact ergonomics. Specifically engineered for trade professionals, this heavy-duty combi drill offers excellent balance and control, making it highly maneuverable when working in tight, awkward spaces or during prolonged overhead drilling.
At the core of this tool is a highly efficient Milwaukee brushless motor, optimized to extract maximum performance from the included two 5.0Ah REDLITHIUM battery packs. To ensure your investment survives the harshest jobsite conditions, the drill features advanced REDLINKâ„¢ overload protection technology, an intelligent electronic system that constantly monitors and defends both the tool and battery against stressful overloading and overheating.
The DeWalt 600W Biscuit Joiner has been constructed with a powerful motor of up to 10000 rpm, making it ideal for working with hardwoods. The dual rack and pinion fence ensuring blade and fence parallelism for accurate joints every time. The joiner has pre-set cutting depths for 0,10 and 20 biscuit sizes with additional adjustments for finer accuracy.