Sika Damp-proofing Slurry is a ready to use (just add water), high quality, thin layer waterproof slurry coating, based on special cements and admixtures to provide a water and damp proof finish.
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
Size
20kg
Interior or Exterior Use
Interior
Coverage per Litre
A 20kg bag of powder will cover 3.5 - 5 m2, applied in two coats at 1 - 2 mm thickness each.
Sika 4a Waterstop is a rapid setting, ready to use waterproofing admixture which can be used to produce a paste for leak stopping against low to moderate water pressure infiltration when mixed with water and ordinary Portland cement.
Dryzone Anti-Mould Additive is a highly-effective biocidal additive liquid. It imparts paints, wallpaper pastes and tile grouts with mould-resistant properties. The special biocidal formula of the additive will resist the growth of mould in areas of persistent condensation for up to five years.
Sika Damp-proofing Slurry is a ready to use (just add water), high quality, thin layer waterproof slurry coating, based on special cements and admixtures to provide a water and damp proof finish.
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
Sika 4a Waterstop is a rapid setting, ready to use waterproofing admixture which can be used to produce a paste for leak stopping against low to moderate water pressure infiltration when mixed with water and ordinary Portland cement.
Dryzone Anti-Mould Additive is a highly-effective biocidal additive liquid. It imparts paints, wallpaper pastes and tile grouts with mould-resistant properties. The special biocidal formula of the additive will resist the growth of mould in areas of persistent condensation for up to five years.