Knauf Wallboard is a plasterboard with an ivory paper face, ideally suited to receive a plaster finish, or for direct decoration. Strong, versatile, and good value, Knauf Plasterboards have a conductivity figure of k = 0.16 W/mK. Knauf Wallboard complies fully with BS EN520 and is categorised as Type A.
Glasroc F multiboard consists of gypsum incorporating a tissue of glass fibre immediately below the surface of the board. The core is reinforced with glass fibre rovings. Suitable for constructing all forms of partition and ceilings, including curved applications, giving high levels of fire and impact protection. Also offers increased levels of moisture performance. Can be used in semi-exposed situations such as eaves, canopies and carport under-linings.
Stop worrying about plaster failure on low-suction backgrounds. Plasprime GG10L Green Grit is a high-performance, aggregate-filled bonding agent designed to provide an exceptional mechanical key. Whether you are dealing with smooth concrete, ceramic tiles, or old plaster, this 10L professional-grade primer ensures your finish coat stays exactly where it belongs.
Brand Name
Plasprime
Country Origin
United Kingdom
Manufacturer Model No
GG10l
Made To Order
N
Colour
Green
Finish
Matt Abrasive
Size
10L
Application Method
6" Emulsion Brush OR any other suitable brush OR Roller
Interior or Exterior Use
Interior
Coverage per Litre
4M2
Drying Time
up to 24 Hours (depending on ambient temperature)
Drying time between coats
Only one coat required
Clean equipment with
Water
Suitable for
Most substrates and concrete free from mold release agents
Gyproc WallBoard is a standard multi-use plasterboard. These plasterboards can be used for many applications and normally require skimming. When fixing this plasterboard sheet use drywall screws. Suitable for most applications where normal fire, structural and acoustic levels are specified. Suitable for direct decoration or Thistle plaster finish. This product comes in a tapered edge finish.
Knauf Wallboard is a plasterboard with an ivory paper face, ideally suited to receive a plaster finish, or for direct decoration. Strong, versatile, and good value, Knauf Plasterboards have a conductivity figure of k = 0.16 W/mK. Knauf Wallboard complies fully with BS EN520 and is categorised as Type A.
Glasroc F multiboard consists of gypsum incorporating a tissue of glass fibre immediately below the surface of the board. The core is reinforced with glass fibre rovings. Suitable for constructing all forms of partition and ceilings, including curved applications, giving high levels of fire and impact protection. Also offers increased levels of moisture performance. Can be used in semi-exposed situations such as eaves, canopies and carport under-linings.
Stop worrying about plaster failure on low-suction backgrounds. Plasprime GG10L Green Grit is a high-performance, aggregate-filled bonding agent designed to provide an exceptional mechanical key. Whether you are dealing with smooth concrete, ceramic tiles, or old plaster, this 10L professional-grade primer ensures your finish coat stays exactly where it belongs.
Gyproc WallBoard is a standard multi-use plasterboard. These plasterboards can be used for many applications and normally require skimming. When fixing this plasterboard sheet use drywall screws. Suitable for most applications where normal fire, structural and acoustic levels are specified. Suitable for direct decoration or Thistle plaster finish. This product comes in a tapered edge finish.