A drywall screw is designed for attaching drywall to wood or metal studs. It is available with either coarse or fine threads. They are threaded along their entire length and are self-threading, this allows them to be installed without the need of apilot hole.
These screws consist of an threaded cylindrical shaft that tapers to a point, with a Hex head at the other end. When these are driven into timber, the threads bite into the wood, while the head stops the screw from going all the way through as it provides compression.
Deck-Tite unique thread pitch to Core Size Ratio gives the perfect balance between ease of insertion and pull-out retention whilst increasing the core sheer strength. Its Tri-Lock thread forms, not cuts, a thread in the material expanding the wood which then relaxes back around the screw ensuring a tight and locked fix. Once driven in the screw will not move, it is secure for good - no stubbed toes!
The 38mm Fibre Cement board screws are perfect fixing method for the 12mm NoMorePly tile backer boards. They have a unique self tapping tip and self-countersinking head. This means they are fast to install and sit completely flush with the surface of the board. The high quality zinc plating means they are suitable for use in wet areas such as bathrooms, wet room and kitchens.
A drywall screw is designed for attaching drywall to wood or metal studs. It is available with either coarse or fine threads. They are threaded along their entire length and are self-threading, this allows them to be installed without the need of apilot hole.
These screws consist of an threaded cylindrical shaft that tapers to a point, with a Hex head at the other end. When these are driven into timber, the threads bite into the wood, while the head stops the screw from going all the way through as it provides compression.
Deck-Tite unique thread pitch to Core Size Ratio gives the perfect balance between ease of insertion and pull-out retention whilst increasing the core sheer strength. Its Tri-Lock thread forms, not cuts, a thread in the material expanding the wood which then relaxes back around the screw ensuring a tight and locked fix. Once driven in the screw will not move, it is secure for good - no stubbed toes!
The 38mm Fibre Cement board screws are perfect fixing method for the 12mm NoMorePly tile backer boards. They have a unique self tapping tip and self-countersinking head. This means they are fast to install and sit completely flush with the surface of the board. The high quality zinc plating means they are suitable for use in wet areas such as bathrooms, wet room and kitchens.