Combi-cut products are supplied partially perforated, providing the flexibility to be used between joists or used uncut as a full-width roll, maximising on-site efficiency.
Manufactured in long lengths to allow quick and simple installation maximising on-site efficiency.
Compression packed and lightweight for easy handling and moving around a site.
Technical specification
Length
4830 mm
Thickness
200 mm
Width
1140 mm
Material
Glass Mineral Wool
Usage
For lofts where pitched roofs are insulated at ceiling level.
Coverage
5.501 m2
Fire Retardant
N
Thermal Conductivity
0.044 W/mK
Pack Quantity
1
Certifications Met
Euroclass A1 Reaction to Fire Classification, Eurofins Gold
SuperFOIL SUPERIOR Foil Tape is a glass fibre reinforced tape, suitable for use with all non-breathable SuperFOIL products. It's superior adhesive makes easy work of sealing overlaps, joints and penetrations and is ideal for use in cold weather.
Recticel Eurowall Cavity Insulation Board measures 1.2m in length, 45cm in width, and has a thickness of 5cm, providing a total coverage area of 0.54 m2.
Recticel Eurowall Cavity is a high-performance PIR insulation board for partial-fill masonry cavity wall applications. Eurowall Cavity is a specialist high-performance solution for cavity walls, with precision-cut straight edges to ensure gaps between boards are kept to a minimum. It has a low emissivity facing that delivers improved thermal resistance within the clear cavity.
Thermaclass Cavity Wall 21 is an easy to install, polyisocyanurate (PIR) insulation board for full fill cavity wall applications, with excellent thermal performance (0.021 W/m.K). Featuring a low emissivity foil facing, it can be installed with up to a 10mm residual cavity (to support ease of installation and accommodate mortar squeeze) or as a full fill solution with no residual cavity. Another significant benefit of Thermaclass Cavity Wall 21 is that it does not require board joints to be taped, saving both time and additional cost to the installer. The tongue and groove edge profile helps to keep the boards in line and acts as the barrier to water ingress by preventing water from tracking between the board joints.
Actis Hybris Panels are 1.2m in length, 114.5 cm in width, and have a thickness of 12.5cm, providing a total coverage area of 2.74m2.
Made of shaped polyethylene foam bonded to aluminium-coated films, their honeycomb structure with low-emissivity cavities provides high thermal efficiency. Heat capacity is 2300JK/kgK. Suitable for timber frames, masonry, pitched roofs, ceilings, and floors. Lightweight with tensile strength over 45kPa, tested to EN 1608 and EN 12310-1, durability maintained after ageing.
SuperFOIL SUPERIOR Foil Tape is a glass fibre reinforced tape, suitable for use with all non-breathable SuperFOIL products. It's superior adhesive makes easy work of sealing overlaps, joints and penetrations and is ideal for use in cold weather.
Recticel Eurowall Cavity Insulation Board measures 1.2m in length, 45cm in width, and has a thickness of 5cm, providing a total coverage area of 0.54 m2.
Recticel Eurowall Cavity is a high-performance PIR insulation board for partial-fill masonry cavity wall applications. Eurowall Cavity is a specialist high-performance solution for cavity walls, with precision-cut straight edges to ensure gaps between boards are kept to a minimum. It has a low emissivity facing that delivers improved thermal resistance within the clear cavity.
Thermaclass Cavity Wall 21 is an easy to install, polyisocyanurate (PIR) insulation board for full fill cavity wall applications, with excellent thermal performance (0.021 W/m.K). Featuring a low emissivity foil facing, it can be installed with up to a 10mm residual cavity (to support ease of installation and accommodate mortar squeeze) or as a full fill solution with no residual cavity. Another significant benefit of Thermaclass Cavity Wall 21 is that it does not require board joints to be taped, saving both time and additional cost to the installer. The tongue and groove edge profile helps to keep the boards in line and acts as the barrier to water ingress by preventing water from tracking between the board joints.
Actis Hybris Panels are 1.2m in length, 114.5 cm in width, and have a thickness of 12.5cm, providing a total coverage area of 2.74m2.
Made of shaped polyethylene foam bonded to aluminium-coated films, their honeycomb structure with low-emissivity cavities provides high thermal efficiency. Heat capacity is 2300JK/kgK. Suitable for timber frames, masonry, pitched roofs, ceilings, and floors. Lightweight with tensile strength over 45kPa, tested to EN 1608 and EN 12310-1, durability maintained after ageing.