Holds an Agrement certificate by the BBA for use in all exposure zones, including those in very severe areas
Engineered to adapt to any slight imperfections in the substrate and knit together, eliminating any air gaps and preserving thermal performance for the lifetime of the building
Friction fits between wall ties, so there is no need for ancillary products, such as retaining discs or jointing tape
Full-fill solution that doesn't require cavity barriers
Technical specification
Reaction to Fire Euro Class
Euroclass A1
Reaction to Fire BS476 Standard
Class 0
Depth
50 mm
Length
1200 mm
Thickness
50 mm
Width
455 mm
Material
Glass Mineral Wool
Colour
Brown
Fire Retardant
Yes
Thermal Conductivity
0.037 W/mK
Thermal Resistance R Value
1.35 m²K/W
Usage
Masonry Cavity Walls
Coverage
6.55 m2
Pack Quantity
12
Certifications Met
Euroclass A1 Reaction to Fire Classification, Eurofins Gold
Actis Hybris Panels are 1.2m in length, 114.5 cm in width, and have a thickness of 15.5cm, providing a total coverage area of 2.74m2.
Made of shaped polyethylene foam bonded to aluminium-coated films, their honeycomb structure with low-emissivity cavities provides high thermal efficiency. Heat capacity is 2300JK/kgK. Suitable for timber frames, masonry, pitched roofs, ceilings, and floors. Lightweight with tensile strength over 45kPa, tested to EN 1608 and EN 12310-1, durability maintained after ageing.
ckwool Sound Insulation Slab, measuring 1.2m x 60cm x 10cm, covers 4.32m2. Designed for internal walls and floors, it reduces noise between rooms and neighbouring properties, while offering excellent fire resistance. Made from stone, its dense, open-porous structure absorbs sound and prevents vibrations. Non-combustible, it withstands temperatures up to 1,000C, serving as a fire barrier to enhance safety and protect property.
Recticel Powerdeck U 1.2 m in length, 60 cm in width, and 5 cm thick providing a total coverage area of 0.72 m2 is a high performance and easy to install flat roof insulation board suitable for torch-on felt. Powerdeck U is a high performance rigid PIR insulation board for use in warm flat roofs with bituminous torch-on felt waterproofing systems. Its optimum stability, strength and structural integrity allows for the flattest finish. Combined with its precision-cut dimensions, your installation is quicker, easier and more cost effective.
Length
1200 mm
Thickness
50 mm
Width
600 mm
Material
PIR
Usage
Warm flat roofs with any hot applied waterproofing system (including torch-on) and any bitumen compatible single-ply membrane system.
Partial fill cavity wall PIR insulation. Fibre free rigid insulation core with aluminium foil composite to both sides. The boards are conveniently sized to co-ordinate with brick and block dimensions and allow the insertion of wall ties at the appropriate spacing.
Length
1200 mm
Thickness
75 mm
Width
450 mm
Material
Rigid polyisocyanurate PIR foam core with aluminium foil composite to both sides
Usage
New build and upgrading thermal performance of existing cavity walls
Actis Hybris Panels are 1.2m in length, 114.5 cm in width, and have a thickness of 15.5cm, providing a total coverage area of 2.74m2.
Made of shaped polyethylene foam bonded to aluminium-coated films, their honeycomb structure with low-emissivity cavities provides high thermal efficiency. Heat capacity is 2300JK/kgK. Suitable for timber frames, masonry, pitched roofs, ceilings, and floors. Lightweight with tensile strength over 45kPa, tested to EN 1608 and EN 12310-1, durability maintained after ageing.
ckwool Sound Insulation Slab, measuring 1.2m x 60cm x 10cm, covers 4.32m2. Designed for internal walls and floors, it reduces noise between rooms and neighbouring properties, while offering excellent fire resistance. Made from stone, its dense, open-porous structure absorbs sound and prevents vibrations. Non-combustible, it withstands temperatures up to 1,000C, serving as a fire barrier to enhance safety and protect property.
Recticel Powerdeck U 1.2 m in length, 60 cm in width, and 5 cm thick providing a total coverage area of 0.72 m2 is a high performance and easy to install flat roof insulation board suitable for torch-on felt. Powerdeck U is a high performance rigid PIR insulation board for use in warm flat roofs with bituminous torch-on felt waterproofing systems. Its optimum stability, strength and structural integrity allows for the flattest finish. Combined with its precision-cut dimensions, your installation is quicker, easier and more cost effective.
Partial fill cavity wall PIR insulation. Fibre free rigid insulation core with aluminium foil composite to both sides. The boards are conveniently sized to co-ordinate with brick and block dimensions and allow the insertion of wall ties at the appropriate spacing.