A smooth masonry paint specially formulated for the professional user, which provides a quality protective and decorative finish. It can be applied to most correctly prepared sound exterior masonry surfaces including rendering (stucco) roughcast, pebbledash and tyrolean; building blocks, concrete and facing bricks, exterior cement-based boards.
Colour Family
Whites
Colour
Brilliant White
Finish
Smooth
Size
10 L
Application Method
Brush, Roller or Spray
Interior or Exterior Use
Exterior
Coverage per Litre
up to 7 m² per litre
Drying Time
1 - 2 (Touch Dry) hrs 3 - 5 (Recoat) hrs
Drying time between coats
3 - 5 hrs
Clean equipment with
Water
Suitable for
Use on most exterior masonry surfaces and exterior grade building boards.
A tough, durable and attractive mid-sheen finish. By using Diamond Technology from Dulux Trade it is 10 times tougher than Dulux Trade Vinyl Silk and resistant to typical household stains. It is quick-drying and of low odour compared to solvent-based paints, and therefore ideal for use where minimum disruption is important. Dulux Trade Diamond Eggshell can be used over surfaces previously decorated with solvent-based paints, providing proper surface preparation is carried out. Suitable for interior use on plaster, masonry and wood
Colour Family
Whites
Colour
White
Finish
Eggshell
Size
5 L
Application Method
Brush, Roller or Spray
Coverage per Litre
Up to 16m² per litre
Drying Time
Dependent on temperature/humidity
Drying time between coats
4 - 6 hrs
Clean equipment with
After use, remove as much paint as possible from equipment before cleaning with water.
Contains a special fungicide which inhibits the growth of fungi and mould inside buildings. Its broad spectrum of antifungal activity makes it ideal for most interior walls and ceilings likely be disfigured by mould. Tested to BS 3900 Part G6.
Colour Family
Whites
Colour
White
Finish
Eggshell
Size
5 L
Application Method
Brush or Roller
Coverage per Litre
Up to 16 m²
Drying Time
Dependent on temperature/humidity
Drying time between coats
4 - 6 hrs
Clean equipment with
After use, remove as much paint as possible from equipment before cleaning with water
Suitable for
Interior Wall & Ceiling surfaces disfigured by mould
Zinsser AllCoat ® Exterior is an ultimate performance, mould resistant paint that offers supreme protection to all exterior surfaces: wood, metal, masonry, plastic, concrete and cladding. It forms a vapour-permeable, low maintenance, water-shedding coating that is recoatable in 1 hour.
Colour Family
Whites
Colour
White
Finish
Satin
Size
1 L
Application Method
Airless Sprayer, Brush, Pad & Roller.
Interior or Exterior Use
Interior or Exterior Use
Coverage per Litre
10m2 per litre
Drying Time
Hard dry 4 hours at 20oC and 60% RH. Full cure achieved after 7 days.
Drying time between coats
1 hour.
Washable
Yes
Clean equipment with
Warm water and liquid detergent; rinse with water.
Suitable for
Wood, metal, masonry, plastic, concrete and cladding.
A smooth masonry paint specially formulated for the professional user, which provides a quality protective and decorative finish. It can be applied to most correctly prepared sound exterior masonry surfaces including rendering (stucco) roughcast, pebbledash and tyrolean; building blocks, concrete and facing bricks, exterior cement-based boards.
A tough, durable and attractive mid-sheen finish. By using Diamond Technology from Dulux Trade it is 10 times tougher than Dulux Trade Vinyl Silk and resistant to typical household stains. It is quick-drying and of low odour compared to solvent-based paints, and therefore ideal for use where minimum disruption is important. Dulux Trade Diamond Eggshell can be used over surfaces previously decorated with solvent-based paints, providing proper surface preparation is carried out. Suitable for interior use on plaster, masonry and wood
Contains a special fungicide which inhibits the growth of fungi and mould inside buildings. Its broad spectrum of antifungal activity makes it ideal for most interior walls and ceilings likely be disfigured by mould. Tested to BS 3900 Part G6.
Zinsser AllCoat ® Exterior is an ultimate performance, mould resistant paint that offers supreme protection to all exterior surfaces: wood, metal, masonry, plastic, concrete and cladding. It forms a vapour-permeable, low maintenance, water-shedding coating that is recoatable in 1 hour.