The general purpose trim from Liniar is used for soffit applications. It is a two part trim for hollow soffit and 9mm soffit board to produce clean finished edges. Manufactured in the UK extrusion facility, Liniar foam trims are made from 100 percent lead-free uPVC. It does not require the user to peel the back of the tape or mark the board while cutting.
The Cavity Sleeve Is Designed To Be Used In Conjunction With Easy-trim Brick Vent To Ventilate Building Interiors Through Exterior Walls. The Design Allows The Units To Be Used Together To Form Stacks Of Either 9" X 6" Or 9" X 9" And Are Suitable For Cavity Widths From 50mm To 100mm. Further Units Can Be Used To Bridge Wider Cavities.
The Hepworth flue vent ventilation terminal is used to maintain airflow and prevent condensation within a redundant flue. It is an effective and simple solution to the structure of an unused chimney, requiring minimal alteration work.
The general purpose trim from Liniar is used for soffit applications. It is a two part trim for hollow soffit and 9mm soffit board to produce clean finished edges. Manufactured in the UK extrusion facility, Liniar foam trims are made from 100 percent lead-free uPVC. It does not require the user to peel the back of the tape or mark the board while cutting.
The Cavity Sleeve Is Designed To Be Used In Conjunction With Easy-trim Brick Vent To Ventilate Building Interiors Through Exterior Walls. The Design Allows The Units To Be Used Together To Form Stacks Of Either 9" X 6" Or 9" X 9" And Are Suitable For Cavity Widths From 50mm To 100mm. Further Units Can Be Used To Bridge Wider Cavities.
The Hepworth flue vent ventilation terminal is used to maintain airflow and prevent condensation within a redundant flue. It is an effective and simple solution to the structure of an unused chimney, requiring minimal alteration work.