Brick Vents Are Ventilated Plastic Blocks That Are Similar In Size And Shape To Standard House Bricks. Used To Create An Airflow Beneath Ground-level Timber Floors Where There Is A Void. Designed To Clip Together To Facilitate Use In Different Size Configurations. Ie. 9 X 6 Or 9 X 9.
An Unobtrusive Vent Which Sits Between Two Bricks To Ventilate Cavites And Provide Drainage For Lintels And Cavity Trays. Easy-trim Weep Vents Feature And Angled Grill Which Aids In The Prevention Of Insect Entry And The Ingress Of Wind Driven Rain.
Please note: This item is a plastic component and therefore is not suitable for use within a) the external walls of buildings more than 11m high where people sleep on the premises (residential, institutional or hospitality) or b) external wall surfaces within 1m of the boundary if the building is 11m high or less, in England. For a compliant alternative see Rytons A1 Fire Rated Metal Rytweep Cavity Weep Vent.
Manthorpe Felt Support Trays are designed to bridge the rafters and provide support for the roofing felt. It eliminates the problem of rotting felt caused by the sagging and retaining of water by the felt at low-level eaves
Slide And Lock 10mm / 25mm
Over Fascia Vents Featuring Our Unique Slidelock Technology Enabling Rapid Installation With Secure Continual Ventilation. Our Unobtrusive And Easy To Install Fascia Vents Are Available In Two Sizes; 10mm And 25mm. Allows An Air Stream In To The Roof Void Between The Felt And Fascia Board. Pieces Are 500mm With Interlocking Male And Female Ends To Allow For A Continuous Length.
Brick Vents Are Ventilated Plastic Blocks That Are Similar In Size And Shape To Standard House Bricks. Used To Create An Airflow Beneath Ground-level Timber Floors Where There Is A Void. Designed To Clip Together To Facilitate Use In Different Size Configurations. Ie. 9 X 6 Or 9 X 9.
An Unobtrusive Vent Which Sits Between Two Bricks To Ventilate Cavites And Provide Drainage For Lintels And Cavity Trays. Easy-trim Weep Vents Feature And Angled Grill Which Aids In The Prevention Of Insect Entry And The Ingress Of Wind Driven Rain.
Please note: This item is a plastic component and therefore is not suitable for use within a) the external walls of buildings more than 11m high where people sleep on the premises (residential, institutional or hospitality) or b) external wall surfaces within 1m of the boundary if the building is 11m high or less, in England. For a compliant alternative see Rytons A1 Fire Rated Metal Rytweep Cavity Weep Vent.
Manthorpe Felt Support Trays are designed to bridge the rafters and provide support for the roofing felt. It eliminates the problem of rotting felt caused by the sagging and retaining of water by the felt at low-level eaves
Slide And Lock 10mm / 25mm
Over Fascia Vents Featuring Our Unique Slidelock Technology Enabling Rapid Installation With Secure Continual Ventilation. Our Unobtrusive And Easy To Install Fascia Vents Are Available In Two Sizes; 10mm And 25mm. Allows An Air Stream In To The Roof Void Between The Felt And Fascia Board. Pieces Are 500mm With Interlocking Male And Female Ends To Allow For A Continuous Length.