Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Sovereign CDM8 membrane provides a robust drainage membrane suitable for above and below ground applications to walls and floors as part of the SovDrain waterproofing system. With a fast track application, the membrane protects new finishes from the effects of dampness and/or salt contamination in above ground situations, and prevents water ingress below ground in areas such as cellars, basements, vaults, and tunnels. This membrane has a relatively low stud profile (8mm), thus minimising wall and floor level changes. The CDM8 membrane is typically finished with either a pre-treated timber stud partition wall and plasterboard or independent stud metal frame system. The floors can be finished with a Sovereign SBR modified screed (minimum 65mm) or a floating floor.
A watertight low-profile sheet membrane for protection against dampness in walls without the need to drill and install plugs. The membrane is a 1.5 mm thick flexible polypropylene sheet with a fleeced surface on both sides. The two fleeces ensure good adhesion to the wall by means of Drybase Flex Adhesive, as well as the direct application of plaster to the face.
Size
1.2 × 15 m
Length
15 m
Thickness
1.5 mm
Width
1.2 m
Weight
9.6
Material
Fleece
Colour
Black
Coverage
1 × 15 m
Pack Quantity
1
Certifications Met
ISO 9001, ISO 14001, Fire Rating: Class F (EN 13501)
Drybase Liquid-Applied DPM is a single-pack barrier coating for above ground use. It is supplied ready to use. It is available in black or white with a consistency similar to that of thick emulsion paint. The product is applied in two coats. Drybase Liquid-Applied DPM Is suitable for use on solid floors, embedded timbers and walls. Once applied, the product cures to form a membrane that is flexible and elastic. Drybase Liquid-Applied DPM is water- based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.
Size
1 Litre
Interior or Exterior Use
Interior
Coverage per Litre
4.5 m2 per 5 litres for vapour barrier, 7 – 9 m2 per 5 litres for general DPM
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Sovereign CDM8 membrane provides a robust drainage membrane suitable for above and below ground applications to walls and floors as part of the SovDrain waterproofing system. With a fast track application, the membrane protects new finishes from the effects of dampness and/or salt contamination in above ground situations, and prevents water ingress below ground in areas such as cellars, basements, vaults, and tunnels. This membrane has a relatively low stud profile (8mm), thus minimising wall and floor level changes. The CDM8 membrane is typically finished with either a pre-treated timber stud partition wall and plasterboard or independent stud metal frame system. The floors can be finished with a Sovereign SBR modified screed (minimum 65mm) or a floating floor.
A watertight low-profile sheet membrane for protection against dampness in walls without the need to drill and install plugs. The membrane is a 1.5 mm thick flexible polypropylene sheet with a fleeced surface on both sides. The two fleeces ensure good adhesion to the wall by means of Drybase Flex Adhesive, as well as the direct application of plaster to the face.
Drybase Liquid-Applied DPM is a single-pack barrier coating for above ground use. It is supplied ready to use. It is available in black or white with a consistency similar to that of thick emulsion paint. The product is applied in two coats. Drybase Liquid-Applied DPM Is suitable for use on solid floors, embedded timbers and walls. Once applied, the product cures to form a membrane that is flexible and elastic. Drybase Liquid-Applied DPM is water- based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.