Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Drybase Plaster Membrane Plugs Pack Of 150
Hover Over to Zoom In
Frequently bought together
Overview
- Plaster membrane plugs specially designed for Drybase Plaster Membrane
- Sturdy, corrosion resistant polypropylene fixing plugs
- Use 13 plaster plugs per square metre
- Helps to save time during installation
- Provides a tight damp-proof seal
- 150 plugs, covers for 10m2
Technical specification
Size
150 Pack
Interior or Exterior Use
Interior
Drying Time
N/A
VOC Level
Minimal 0-0.29%
Colour
Orange
Type
Plaster Membrane Plugs
Manufacturer Model No
CM-PLASTER PLUGS 150
Brand Name
Drybase
Reviews
Be the first to review this product.
Safeguard Drybase Plaster Membrane 2m X 20m
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
£488.51 each (Inc. VAT)
Sovereign 30806090 CDM8 Membrane Roll 2.4M x 20M
Sovereign CDM8 membrane provides a robust drainage membrane suitable for above and below ground applications to walls and floors as part of the SovDrain waterproofing system. With a fast track application, the membrane protects new finishes from the effects of dampness and/or salt contamination in above ground situations, and prevents water ingress below ground in areas such as cellars, basements, vaults, and tunnels. This membrane has a relatively low stud profile (8mm), thus minimising wall and floor level changes. The CDM8 membrane is typically finished with either a pre-treated timber stud partition wall and plasterboard or independent stud metal frame system. The floors can be finished with a Sovereign SBR modified screed (minimum 65mm) or a floating floor.
£365.94 each (Inc. VAT)
Safeguard Drybase Liquid Damp-proof Membrane 1L White
Drybase Liquid-Applied DPM is a single-pack barrier coating for above ground use. It is supplied ready to use. It is available in black or white with a consistency similar to that of thick emulsion paint. The product is applied in two coats. Drybase Liquid-Applied DPM Is suitable for use on solid floors, embedded timbers and walls. Once applied, the product cures to form a membrane that is flexible and elastic. Drybase Liquid-Applied DPM is water- based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.
£35.42 each (Inc. VAT)
Sovereign 30806093 CDM Plug Washers Pack 100
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications.
£2,311.20 each (Inc. VAT)