Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Wykamol Water Proofing Membrane CM3mESH
Hover Over to Zoom In
Frequently bought together
Overview
- CM3 provides a fast track solution to damp barriers on floors
- Can be used as part of a Type C Cavity Drain Membrane System in line with BS8102:2022
- Quick to install - minimal preparation needed to walls and floors
- Easy to fold around doors and windows and easily cut down with a sharp blade
- No drying out process - redecoration can occur immediately
- Waterproof, salt inhibiting, root and contaminant resistant
- Little or no damage to the existing structure
- Creates a dry, habitable environment
Technical specification
Manufacturer Model No
CM3MESH
Brand Name
Wykamol
Reviews
Be the first to review this product.
Safeguard Drybase Flex Membrane 1.2 X 15 M
A watertight low-profile sheet membrane for protection against dampness in walls without the need to drill and install plugs. The membrane is a 1.5 mm thick flexible polypropylene sheet with a fleeced surface on both sides. The two fleeces ensure good adhesion to the wall by means of Drybase Flex Adhesive, as well as the direct application of plaster to the face.
£166.02 each (Inc. VAT)
Safeguard Drybase Plaster Membrane 2m X 20m
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
£488.51 each (Inc. VAT)
Sovereign 30806084 CDM8 Lath Mesh Membrane Roll 1.5M x 10M
Sovereign CDM8 membrane provides a robust drainage membrane suitable for above and below ground applications to walls and floors as part of the SovDrain waterproofing system. With a fast track application, the membrane protects new finishes from the effects of dampness and/or salt contamination in above ground situations, and prevents water ingress below ground in areas such as cellars, basements, vaults, and tunnels. This membrane has a relatively low stud profile (8mm), thus minimising wall and floor level changes. The CDM8 membrane is typically finished with either a pre-treated timber stud partition wall and plasterboard or independent stud metal frame system. The floors can be finished with a Sovereign SBR modified screed (minimum 65mm) or a floating floor.
£197.95 each (Inc. VAT)
Sovereign 30806090 CDM8 Membrane Roll 2.4M x 20M
Sovereign CDM8 membrane provides a robust drainage membrane suitable for above and below ground applications to walls and floors as part of the SovDrain waterproofing system. With a fast track application, the membrane protects new finishes from the effects of dampness and/or salt contamination in above ground situations, and prevents water ingress below ground in areas such as cellars, basements, vaults, and tunnels. This membrane has a relatively low stud profile (8mm), thus minimising wall and floor level changes. The CDM8 membrane is typically finished with either a pre-treated timber stud partition wall and plasterboard or independent stud metal frame system. The floors can be finished with a Sovereign SBR modified screed (minimum 65mm) or a floating floor.
£365.94 each (Inc. VAT)